• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.

‎09-04-2021 12:50 AM

HP Recommended
Product: HP Elitebook Revolve 810 G2
Operating System: Microsoft Windows 8.1 (64-bit)

Hello

 

I am trying to repair my client's laptop which is an Elitebook Revolve 810 G2. Please see image for symptoms: https://imgur.com/MGhe0uI

 

I have purchased a replacement display cable on Ebay that looks like this: https://imgur.com/HBQ7LSN. Seller was only able to verify it works with G1 model.

 

Before going through the very involved disassembly steps on Page 60 from Maintenance and Service Guide: http://h10032.www1.hp.com/ctg/Manual/c04055028, I wanted to verify that the cable is indeed compatible with the display assembly. 

 

However, I have had a very hard time even opening up the display assembly . Please see attached image:  https://imgur.com/bbdFGnw. I have removed the 4 screws holding rear cover to back of display but I cannot detach the screen from the rear cover. Do I need to use something like a spudger to pry it out? Risk of damage? Will adhesive need to be re-applied?

 

Looking at the following listings, it does seem that the screen can be detached from the rear cover:

 

Complete display assembly: https://www.ebay.com/itm/174689817262?hash=item28ac5312ae:g:6ScAAOSwagpgUvRT

 

Display only (with rear cover removed): https://www.ebay.com/itm/154593206303?hash=item23fe79201f:g:JgAAAOSwsWhhL6Xu

 

Back cover only: https://notebookparts.com/hp-elitebook-revolve-810-g1-g2-lcd-back-cover-34-4xf02-xxx-604ox1/

 

So please advise me on how I can dismantle the screen assembly. Thanks

 

 

 

 

 

Category:
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.