• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
Samsung CLX-6260FW
Microsoft Windows 10 (64-bit)

I turned off the printer after a few weeks of operation. When I started the printer display was totally blank. The power and start light do not come up after strat. I used hard reset and the blue light came on, but no action.

 

It looks like the printer goes through its cycle of operation, but it stops at some stage. I have an old Firmware dated 2012. I tried to update firmware, but as you know old versions of the driver are not available and I can not jump to the latest version.

 

I exhausted the internet and tried every command. Appreciate any suggestions?

 

Thx,

 

Matt

 

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.