HP INK TANK 315 Problem with manual two side printing (random print orientation changes)

[DWLFE]

In advance, my English sucks, sorry for that.
Ok hare is the issue. When i choose to print on two sides of multiple page document I got a weird outcome. No matter what print setting chose ( start from even pages \ odd pages, turn on -off auto align and rotate site or anything else ) some Pages are randomly print in reverse position and some are print normally. There is no visible pattern in it.
Let say I chose to 50 pages document that will give 25 double-sided print paper pages.
I chose start from odd pages.My outcome is some pages (random amount) is printed upside down then printer start to make some clicking noises, then few pages comes out in normal position. Then again printer start to make some clicking noises some part of a document is printed upside down. Same pattern goes to the second part of any document. The bigger the document the more paper orientation turns I get. The Printer paper try is on top so every page should be printed upside down.

Im using HP Linux Imaging and Printing System (ver. 3.21.10)
Here is my log hp-check  -b inside spoiler tag

Spoiler

pc@pc:~$ sudo hp-check -b
[sudo] hasło użytkownika pc:
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/kuba/hp-check.log

HP Linux Imaging and Printing System (ver. 3.21.10)
Dependency/Version Check Utility ver. 15.1

Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).

Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION

Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version

---------------
| SYSTEM INFO |
---------------

Kernel: 5.4.0-91-generic #102-Ubuntu SMP Fri Nov 5 16:31:28 UTC 2021 GNU/Linux
Host: kuba-pc
Proc: 5.4.0-91-generic #102-Ubuntu SMP Fri Nov 5 16:31:28 UTC 2021 GNU/Linux
Distribution: 22 20.2
Bitness: 64 bit

-----------------------
| HPLIP CONFIGURATION |
-----------------------

HPLIP-Version: HPLIP 3.21.10
HPLIP-Home: /usr/share/hplip
HPLIP-Installation: Auto installation is supported for linuxmint distro 20.2 version

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.21.10

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.21.10
html=/usr/share/doc/hplip-3.21.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=yes
class-driver=no

Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory

Current contents of '~/.hplip/hplip.conf' file:
warning: Could not access file: No such file or directory
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>

-------------------------
| External Dependencies |
-------------------------

cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.1 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.50 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.29 OK -
dbus DBus - Message bus system REQUIRED - 1.12.16 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.20.3 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -

------------------------
| General Dependencies |
------------------------

libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.1 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.1 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.10 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt5-dbus PyQt 5 DBus - DBus Support for PyQt5 OPTIONAL 5.0 5.14.1 OK -
python3-pyqt5 PyQt 5- Qt interface for Python (for Qt version 4.x) REQUIRED 5.0 5.14.1 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.9 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.8.10 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.4.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.6.3 OK -

--------------
| COMPILEDEP |
--------------

libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 9.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK -

---------------------
| Python Extentions |
---------------------

cupsext CUPS-Extension REQUIRED - 3.21.10 OK -
hpmudext IO-Extension REQUIRED - 3.21.10 OK -

----------------------
| Scan Configuration |
----------------------

hpaio HPLIP-SANE-Backend REQUIRED - 3.21.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.21.10 OK -

------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------

device `hpaio:/usb/Ink_Tank_310_series?serial=CN0BI6M3BG06PH' is a Hewlett-Packard Ink_Tank_310_series all-in-one

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

Device URI Model
-------------------------------- ----------------------
hp:/usb/Ink_Tank_310_series?seri HP Ink Tank 310 series
al=CN0BI6M3BG06PH

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Ink_Tank_310
------------
Type: Printer
Device URI: hp:/usb/Ink_Tank_310_series?serial=CN0BI6M3BG06PH
PPD: /etc/cups/ppd/Ink_Tank_310.ppd
PPD Description: HP Ink Tank 310 Series, hpcups 3.21.10
Printer status: printer Ink_Tank_310 is idle. enabled since sob, 11 gru 2021, 12:46:30
Communication status: Good

--------------
| PERMISSION |
--------------

USB Ink_Tank_310 Required - - OK Node:'/dev/bus/usb/001/002' Perm:' root lp rw- rw- rw- rw- r--'

-----------
| SUMMARY |
-----------

Missing Required Dependencies
-----------------------------
None

Missing Optional Dependencies
-----------------------------
None

Total Errors: 0
Total Warnings: 1

Done.

and errors from hp-doctor

Spoiler

Ink_Tank_310
------------
Type: Printer
Device URI: hp:/usb/Ink_Tank_310_series?serial=CN0BI6M3BG06PH
PPD: /etc/cups/ppd/Ink_Tank_310.ppd
warning: Failed to read /etc/cups/ppd/Ink_Tank_310.ppd ppd file
PPD Description:
Printer status: printer Ink_Tank_310 is idle. enabled since sob, 11 gru 2021, 12:46:30
Communication status: Good

--------------
| PERMISSION |
--------------

USB Ink_Tank_310 Required - - OK Node:'/dev/bus/usb/001/002' Perm:' root lp rw- rw- rw- rw- r--'

Checking for Configured Queues....
warning: Fail to read ppd=/etc/cups/ppd/Ink_Tank_310.ppd file
warning: Insufficient permission to access file /etc/cups/ppd/Ink_Tank_310.ppd
warning: Could not complete Queue(s) configuration check

Checking for HP Properitery Plugin's....
No plug-in printers are configured.

Diagnose completed...c