• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.

‎06-08-2017 07:12 AM

HP Recommended
Product: HP Laserjet 600 M601
Operating System: Microsoft Windows 7 (64-bit)

Networked printer: The user needed the print jobs shifted to the left on Tray 2. It appears that any changes to the image registration to Tray 2 (although confirmed  they are set through checking  the webpage interface and the console) do not impact the print jobs regardless of the software/document type printed to that tray. 

 

I was able to finally get Tray 3 to take the changes to the Y axis (I should say minus Y) setting to shift the print jobs to the left. The user also wanted to shift the print jobs up a bit but when I adjusted the X axis it impacted the Y axis shifting the print job back to the right. Print jobs tested: Case Catalyst doc type: .sgngl, WordPerfect doc type: .wpd.

 

After trying the adjustments for more than an hour we settled with the Y axis at minus 5 and the X axis at zero. I didn't need to make any changes to X2 or Y2 as this printer is not used for duplex. 

 

Why would image registration work and then not work and then work again? I was looking for firmware updates that may address the image registration issues to be confident that would fix the problem but cannot find details to that end. I have no problem updating firmware but I need to know what the updates include/fix in detail.

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.