-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Desktops
- Desktop Boot and Lockup
- Who Me Too'd this topic
Create an account on the HP Community to personalize your profile and ask a question
10-11-2018 09:55 AM
After doing updates this machine Blue screens with the error message WDF_VIOLATION. I cannot boot to safe mode and it does not allow me to do a system restore before the updates have gone through. I have had to reinstall this machine several times now (using USBs and MDT as I also cannot do a Winodws 10 reset). I have tried installing drivers from https://support.hp.com/gb-en/drivers/selfservice/hp-proone-400-g3-20-inch-touch-all-in-one-pc/152924... and the intel website but still it crashes. Can anyone give me advice on what update or what driver may be causing this to crash. Below is the SrtTrail results after it fails a start up repair.
Startup Repair diagnosis and repair log
---------------------------
Number of repair attempts: 1
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = E:\windows
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 219 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 1281 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 141 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 125 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 1890 ms
Test Performed:
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Root cause found:
---------------------------
Boot critical file e:\boot\resources\custom\bootres.dll is corrupt.
Repair action: File repair
Result: Failed. Error code = 0xa
Time taken = 19047 ms
---------------------------
---------------------------
Solved! Go to Solution.