• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
Guidelines
Are you having HotKey issues? Click here for tips and tricks.

‎09-03-2019 06:02 PM

HP Recommended
Product: Elitedesk 800 G2
Operating System: Microsoft Windows 10 (64-bit)

Hello, I need to enable Wake On LAN for a fleet of 800 G2 ELitedesks.

 

I went into BIOS>Advanced>Built-In Device Options. I ensured that Embedded LAN Controller was checked and Wake On LAN set to Boot to Hard Drive (I'll later be doing PXE boot but want to start out making sure this works.)

 

I also went into Advanced>Power Management Options. I unchecked S5 Maximum Power Savings, and SATA Power Management. I checked PCI Express Power Management.

 

In Windows 10, I went to Device Manager, I right clicked on the properties of the NIC adapter, I went to the Power Management tab I checked all three boxes (Allow the computer to turn off this device to save power, Allow this device to wake the computer and Only allow a magic packet to wake the computer.) I also enabled Wake on Magic Packet in the Advanced tab.

 

I sent a magic packet to the MAC address using wol.exe utility but the PC will not power up.

 

What am I missing?

Thank You!

Who Me Too'd this topic
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.