• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
Guidelines
Seize the moment! nominate yourself or a tech enthusiast you admire & join the HP Community Experts!

‎11-11-2023 01:09 PM

HP Recommended
Operating System: Microsoft Windows 11

Hello everyone, I am writing about a problem that happened on a new HP Z1 G9 workstation.

 

On first boot I ran the BIOS update and later the initial Windows setup without any problems by simply adding an admin user and assigned the name to the device.

 

I then turned off the PC, added two WD Red 3.5-inch disks, turned on the PC, and after logging into Windows saw the disks correctly from Windows (I did not initialize them, I saw them from Disk Management).

 

Rebooting the PC, I then went into Bios to enable the RAID feature, saved and exited BIOS.

 

At this point, while the system was booting, the blue screen appeared with the error INACCESSIBLE_BOOT_DEVICE.

I tried performing a system restore with F8 and choosing all possible restore configurations and none succeeded by aborting immediately.

 

Do you have any suggestions for getting the boot to run with the RAID configuration active?

 

Thank you.

Labels:
Who Me Too'd this topic
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.