• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP ZBook Firefly 15.6 inch G8 Mobile Workstation PC (346U7UT)

When connecting a Dell U2725QE monitor via USB-C (Thunderbolt), the device appears briefly (for 0.5-1 seconds) in the Thunderbolt Control Center, then disappears. The monitor does not display anything. The only time it might work is when connected before boot, but even that succeeds very rarely.

 

Environment:
- BIOS Version: 01.21.00
- Thunderbolt Controller: Intel Thunderbolt 4 (9A1B)
- OS: Windows 11 Pro 23H2
- Monitor: Dell U2725QE (Thunderbolt 4 capable)

 

Observed Behavior:
- Thunderbolt Control Center detects the monitor for 0.5-1 seconds, then it disappears.
- The monitor does not activate or receive signal.
- Keeping the monitor plugged in before boot only helps in extremely rare cases.

 

What I’ve Tried:
- Rolled BIOS back from 01.21.00 to 01.14.00 using official HP tools

- ME and firmware rollback fail with error log "Full Recovery of the Intel Management Engine Firmware failed, unable to find a valid firmware image."

 

Request:
- Is this a known issue with ZBook G8 and BIOS 01.21.00?
- How can I restore stable Thunderbolt functionality and ensure displays are detected properly?

 

Thanks for support.

Who Me Too'd this topic
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.