02-09-2018 02:32 PM
Can anybod tell me were I can get the list of drivers and hardware that HP ScanPro 5 supports?
I want to see which cameras and projectors it directly supports, and which ones it may be able to support by using generic drivers.
02-09-2018 06:13 PM
Please check the following site
Probably you are looking at the following list
Universal USB camera driver for DAVID-CAM-1-M|C, DAVID-CAM-3-M, DAVID-CAM-3.1-M (SLS-2), and DAVID-CAM-4-M (SLS-3). Works on all Windows versions.
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
02-10-2018 05:07 PM - edited 02-10-2018 05:36 PM
Thanx for getting back to me.
The driver you linked me to is for the David software.
Where does it say it will work with the HP ScanPro software?
Thanx ... Chris
02-12-2018 02:44 AM - edited 02-12-2018 06:35 AM
there is no actual list of supported cams and drivers. HP 3D Scanning software supports any camera with DirectX driver. Setup menu > setup type > custome structured light scanner. Your cam should be listed in camera setup. To get good scans you should be able to set exposure value to 60, so that your cam is synced with projector. If driver of your camera is not alowing that you will have lines in scans. To be 100% sure that the cam works well with the software you will have to test it.
Original David Team Member