• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

HP Recommended

The driver for my Touchpad on my PC laptop (12C HID Device) says error code 10. It says it cannot start and is likely due to firmware. I have updated firmware and do not know what else to do. Help please.

1 REPLY 1
HP Recommended

Hi @Maximus1616,

Thanks for posting. "I2C HID Device" with code 10 means the touchpad's controller driver didn't start, often after a Windows update or a missing chipset/serial IO driver.

Option 1 – Reinstall

  1. Device Manager > Human Interface Devices > right-click I2C HID Device > Uninstall device, then restart.
  2. Install the chipset/Serial IO and touchpad drivers for your model from HP Support Assistant or https://support.hp.com/drivers.

Option 2 – Power reset

  1. Shut down, unplug the charger, hold power for 15 seconds, then start.

Please share your laptop model if it persists. Let me know!


I am proudly Mexican, a Computer Systems Engineer and an HP Community volunteer (not an HP employee).
Did this reply help? Click the "Yes" button below to say thanks.
Did it solve your problem? Please click "Accept as Solution" so others with the same issue can find it.
Please keep the conversation in the thread and never post personal data (serial number, email, phone or address).


† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->