• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
HP Pavilion Laptop PC 14-dv1000 (464V0AV)
Microsoft Windows 11

very recently i bought the pavilion laptop, While running the battery check in Hp support Assistant, it is showing the below msg

The battery is functioning correctly, but it needs to be calibrated. You will experience shorter battery life between charges if the battery is not calibrated

I followed the below mentioned steps twice still facing the same issue

1)connect the AC Adapter.
2)Fully charge your battery (99%-100%).
3)Keep the AC Adapter connected to the computer for 3 hours with the battery fully charged (99%-100%).
4)Launch HP Battery Check using HP Support Assistant to validate the results.

so could u please suggest how to resolve this issue.

 

1 REPLY 1
HP Recommended

Hello @Hema7 

 

Do the following trick ...

 

(1) Open the windows device manager and uninstall the "Microsoft ACPI-Compliant Control Method Battery

- Right click on "Microsoft ACPI-Compliant Control Method Battery"

- Click "Uninstall device"

- Confirm your choice if you see a popup notification

ub6424_0-1656419222548.png

 

(2) Shutdown your notebook/computer

 

(3) Remove battery, remove ac adapter, press and hold the power button for 30 seconds.

(Note: If do not have the technical skills to remove the battery (most notebook has to be diassembled !) , just start the notebook and go directly into the bios (ESC/F1/F2/F10) and let the notebook stay there or run HP Diagnostic Test loops to drain the battery (don't connect the AC adapter !) until it is switching off automatically

 

(3) Install battery, plugin ac adapter and wait until the battery is fully charged (don't start the windows operating system !) and check the charging led.

 

(4) If you do have no charging led, wait at least 2 hours ...

 

(5) Start your notebook/computer, now the windows battery management system is synchronized with your installed battery. Normally it should show 98-100% battery level.

 

(6) If your battery level is too low and you are loosing your battery capacity too fast, your battery has to be replaced...

 

Please report your results

 

best regards

---

Dear Community Member, please click the button [ YES ] on "Was this reply helpful?" to say Thanks and

make it easier for other people to find this type of solution by marking the reply ▶️ [ Accept as Solution ] ◀️

Do this on the post I wrote that helped solve it.

Thank you very much

             ⌨️

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.