-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Business Notebooks
- Bios update failure on ProBook 440 G6

Create an account on the HP Community to personalize your profile and ask a question
04-08-2020 02:58 AM
Hello. When I try to update bios via network or flash drive I'm facing with crash on my ProBook 440 G6. Error with screenshot is attached.
Does anyone know how this issue can be solved except buying and installing Windows?
Thanks
Best regards
Andriy
04-08-2020 06:09 AM
Hi
Your screenshot takes time to get approved, so I am guessing.
SKU: please
Is it one of these?
https://support.hp.com/gb-en/product/hp-probook-440-g6-notebook-pc/23200928/manuals
Personally I would make a W10 install media, make some space and attempt to install it.
For when it’s a NON MS OS ( iOS / Linux ) creating the install media.
www.microsoft.com/en-us/software-download/windows10ISO
No purchase necessary. Then do the BIOS update and either ignore W10 or delete it.
It is unlikely that the BIOS updater will run from the command prompt.
Long shot is to make a USB and boot from that...
https://support.hp.com/us-en/document/c02693833
OR
https://lukas.dzunko.sk/index.php/Hardware:_How_to_update_BIOS_on_HP_Laptop_using_Linux
04-14-2020 01:34 AM - edited 04-14-2020 01:35 AM
Hi. Thanks for such extended response and advice.
I have tried to follow your advice and ran bios update from Windows 10 by using standard HP bios update software downloaded from official website.
During installation the update software created bios backup on disk and restarted the laptop. Then bios update which consist of few stages started to run and after one successful stage I've seen the same error.
Unfortunately I came to same results.