• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Checkout the HP Cool Control for HP Spectre Notebooks Click here for tips and tricks to keep your device cool.
HP Recommended
Probook 450 G7
Microsoft Windows 10 (64-bit)

We now have 3 450G7 Probooks that have had a Bios update.  After the reboot they are stuck on the HP logo.  I have tried all the recommended key combinations to reset the Bios.  I have also tried to boot from bios USB to reset.  No luck.  Any help would be appreciated.

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

I was able to remove the hard drive then boot to the Bios USB and get the bios flashed.  This is resolved.

View solution in original post

3 REPLIES 3
HP Recommended

I was able to remove the hard drive then boot to the Bios USB and get the bios flashed.  This is resolved.

HP Recommended

Hi, I have the same problem, following a BIOS update last night that appeared successful.

 

How do I create a BIOS image on USB? Could anyone point me to more detailed instructions? Should I revert to an earlier version?

HP Recommended

Don't worry. I took the back off and disconnected the SSD. After that, it booted into the setup menu, and I ran diagnostics successfully. Popped the SSD back in, and it booted normally. The BIOS update had indeed been successful. No further action neccessary.

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.