cancel
Showing results for 
Search instead for 
Did you mean: 
Ade320
New member
1 0 0 0
Message 1 of 2
108
Flag Post

Pro book not recognising toshiba USB 2.0 HDD

HP Recommended
Pro book 650 G2
Microsoft Windows 7 (64-bit)

Hi at work we all have HP pro book 650 G2’s, none of them recognise a toshiba USB 2.0 hard drive (DTB310) it just powers up but with a blue light instead of a white light when we plug it in anywhere else, we have to use a multipoint usb adaptor and this allows us to access it but is very slow. I’ve tried running through all the online guides removing the usb controller and reinstalling it but not sure if there is another option or an emulator

1 REPLY 1
soccer_dan
Level 8
Level 8
1,195 1,195 74 153
Message 2 of 2
Flag Post
HP Recommended

if the system is up to date with BIOS and other drivers (use HP Image Assistant) to check, then there is not much you can do... USB 2.0 is a very, very, very slow speed standard and you will not be able to get fast access to the contents... best to obtain a newer drive with at least usb 3.0 support and transfer the contents to it

I work for HP. However, all opinions and comments are my own.
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation