Create an account on the HP Community to personalize your profile and ask a question
11-12-2019 06:05 AM
Product: HP Z600 Workstation
Operating System: Microsoft Windows 10 (64-bit)
i have a HP z600 workstations its 650w PSU doesn't enough suitable cables to power the r9 280x
- 2x SATA and Molex (same rail)
- 1x PCI Express (direct from PSU)
how can i use adapters to power the 6pin and 8Pin of GPU and generate the required wattage for it..
i tried the Y-splitters and powered all from one molex , it works but it restarts when rendering or gaming
And want to mention that Radeon R9 280x is working very good in HP Z420 Workstation....that so weird
2 REPLIES 2
11-13-2019 01:58 PM
It sounds like your overloading your PSU. Please see the extract below from the HP Z600 quickspecs;
The above example is based on a Quadro FX4800 graphics card which has a maximum power draw of only 146W. The Radeon R9 280x draws 250W under full load, 104W more! The highest powered card listed in the Z600 quickspecs is the Quadro 5000 which has a power draw of just 152W. Are you running with a single or dual CPU configuration and what CPU(s) are you using? i.e. the Radeon card may run stable in a single CPU/3 DIMM modules configuration but I still think you might overload the PSU.
I would recommend you look at the Z600 quickspecs for more information.
HP Z620 - Liquid Cooled E5-1680v2 @4.7GHz / 64GB Hynix PC3-14900R 1866MHz / GTX1080Ti FE 11GB / Quadro P2000 5GB / Samsung 256GB PCIe M.2 256GB AHCI / Passmark 9.0 Rating = 7147 / CPU 17461 / 2D 1019 / 3D 14464 / Mem 3153 / Disk 15451 / Single Threaded 2551
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community