Showing results for 
Search instead for 
Did you mean: 
New member
2 1 0 0
Message 1 of 3
Flag Post

HP Z230 Workstation not booting

HP Recommended
Microsoft Windows 10 (64-bit)

Product Name - HP Z230 Workstation - M2H96PA

  1. Boot problem,.
  2. Get beep sound when switched on and switches off and again switch on (looping) then fan runs too fast
  3. No display
  4. Have 4 4gb Ram, Removed one by one RAM when same issue came. After removing it booted previously. Now not booting.
  5. When switch ON no power to keyboard & mouse.
Level 11
4,246 4,230 386 875
Message 2 of 3
Flag Post
HP Recommended

symptoms indicate possible corrupted bios, search forum for crysis recovery by "SDH" which details steps to take to reflash bios


procedure should be similar to z400

New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Issue resolved. It was power problem. Unplugged cables from SMPS to motherboard and plugged in. And one RAM was not working. Thanks for the help.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation