cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
TheRealyDealy
New member
2 0 0 0
Message 1 of 2
164
Flag Post
HP Recommended

HP z200 question

HP z200 tower

I was looking at pcs and I came across the HP z200 Tower, On the website I noticed it says the system board factor is ATX and the dimensions are 9.9 x 12 inches Link: https://support.hp.com/us-en/document/c02027649

I then looked up the standard ATX size and it says the board size is 9.6 x 12 inches, if the board is 9.9 x 12 is it still standard ATX?

1 REPLY 1
Level 11
2,786 2,780 240 545
Message 2 of 2
92
Flag Post
HP Recommended

HP z200 question

the ATX standard describes many things besides the size of the board,  and in this case HP has plainly stated that while the board does follow the atx standard in most things it does not follow it in regards to exact board size, which is why the actual size is listed in both Millimeters and inches.................... also the size difference between 9.6 and 9.9 is a very small difference that is unlikely to affect most users since this board is part of a custom system, and said board will also fit in 99.9% of 3rd party cases

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation