-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Business PCs, Workstations and Point of Sale Systems
- Installing a Riser on z620

Create an account on the HP Community to personalize your profile and ask a question
10-03-2018 08:43 AM
Hi,
As per the latest specs and guides, 2690v1 or 2680v1 are not listed among the available processors.
From Serial Number, I can check how old the unit is and if it supported these cards at the time the unit was sold referring to previous versions of Quick Specs and Guides.
I will strictly follow the Quick Specs and if these CPUs are not listed, that means it is not supported/tested.
Thank you,
Suvadeep Dutta
10-03-2018 01:52 PM
You can run one or two of those two processors in either the Z620 v1 or the Z620 v2. Here is the Z620 v1 first QuickSpec:
https://s4u.com.ua/assets/files/hp-z620.pdf
HP has not taken away use of any of the listed processors from all I have seen, and v1 processors also work in v2 Z620s. A processor has to have dual QPI links to run two of them, and both do.
10-04-2018 12:59 AM
sweet - I see now that the Z620 Xeon E5-2690 processor is acccepted.....
I have two more quick quesations -:
1) Dual CPU 2690 will be the fastest available processor combination for z620v1?
2) Do you think e5-2680 CAN BE BETTER THAN CPU 2690 in terms of extended persistent mathematical calculations??? like going non stop for 10 hours at 99% core speed? I ask this because maximum accepetabel temperature of CPU 2690 (72C) is lower than 2680 (85C)
10-04-2018 07:55 AM
The most expensive ones are always better, especially if they have red and gold stripes.
And, it is your heatsink/fan's job to keep the temps down. Just raise the RPMs of your fan via BIOS during those long runs. You can see the temps via the free HWMonitor utility from cpuid.com.
10-04-2018 01:11 PM - edited 10-04-2018 01:12 PM
yes I can change the fan setting -- btu fundamental quetion is if the duffrenece of maximum allowed temperature in 13C is critical for massive long-term cpu burning caluclation runs?
and with 85C is it meant to work in large server racks - not workstations?
10-04-2018 03:52 PM
The answer to both of your questions is no.
However, please note that you may wish to research upgrading your current v1 motherboard to a v2 Z620 motherboard, which would get you the ability to run a whole new generation of processors, and even run a faster generation of memory. And, think of all the processors in the v2 QuickSpecs that you can research and search for good deals on.
I recently did this and the difference is remarkable. It is almost as fast as our Z640 workstations. I happened to find a brand new unused v2 Z620 motherboard and had the opportunity to learn about how to "tattoo" or "brand" the motherboard so it could use all the special codes on the labels on the original workstation.
I've got a new project going.... signing off. Have fun.