Create an account on the HP Community to personalize your profile and ask a question
02-23-2021 01:47 PM
Product: Z8 G4
Operating System: Microsoft Windows 10 (64-bit)
Hi, I received a new HP Z8 G4 with 3 x M.2 NVME drives over two NVME adapters. I am trying to install a Win10 image via Configuration Manager over PXE. It keeps installing onto the second NVME drive on the first adapter (while the OS that it came with is in the first NVME drive) I have subsequently performed a secure erase on all NVME drives, but still goes to the second. Anyone experienced the same thing?
Solved! Go to Solution.
1 ACCEPTED SOLUTION
4 REPLIES 4
02-23-2021 03:30 PM - edited 02-23-2021 03:32 PM
there are a few reasons for this some can be,......... different SSD types PCI-e/SATA/ or the PCI-E ssd slot positions or boot order in the bios
also, your 3 ssd's on 2 m.2 cards indicates one card has dual ssd's and this card unless it has boot circuitry cannot be a boot device unless using the intel matrix raid
02-26-2021 02:46 AM
I wanted to maintain a situation whereby if I needed to restore the machine via Config Mgr \ SCCM, that whoever was doing it would not need to know to remove any other drives to do so. I took your advice in part by isolating the NVME drive I wanted as my OS drive on the 1st adapter and putting the other two onto the second adapter. This worked for me, so thanks for the steer to a resolution. Ken
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community