cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Note for common printer problems
Customers receiving the"will damage your computer" message along with others like "unable to access cups/tmp" or "'@%' cannot be opened" need to update their version of the macOS. Please check this article for more information: HP Printers - A [software component] will damage your computer message displays when printing or while installing (macOS) .
Highlighted
New member
1 0 0 0
Message 1 of 2
180
Flag Post

APF sucked paper back in wont eject

HP Recommended
designjet pro 8720
Microsoft Windows 10 (32-bit)

I tried to scan using the smart HP.  the paper feed through the APF stopped for a moment and took it back, how do I eject it?

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
15,250 15,228 1,197 1,196
Message 2 of 2
Flag Post
HP Recommended

@Mcnikki, Welcome to HP Support Community!

 

Clean the ADF rollers and the separator pad

Dust inside the automatic document feeder (ADF) can result in paper feed issues.

  1. Get a lint-free cloth and distilled water.

  2. Remove the original document from the ADF.

  3. Turn off the printer.

  4. Disconnect the power cord from the rear of the printer.

  5. Open the ADF cover.

    Lifting the ADF cover
  6. Find the paper pick rollers and the separator pad inside the ADF.

    ADF paper pick rollers and separator pad

     

    1.Paper pick roller

    2.Separator pad

  7. Lightly dampen a clean, lint-free cloth with filtered or distilled water, and then squeeze any excess liquid from the cloth.

  8. Use the damp cloth to clean the paper pick rollers and the separator pad.

  9. Leave the ADF cover open for two minutes to allow the rollers and pad to dry.

  10. Close the ADF cover.

  11. Reconnect the power cord to the printer, and then turn on the printer.

  12. Slide in the paper width guides until they rest against the sides of the paper.

  13. Try to scan or copy with the ADF.

Reset the printer

Reset the printer to recover from printer errors or failures.

  1. With the printer turned on, disconnect the power cord from the printer.

  2. Unplug the power cord from the power source.

  3. Wait 60 seconds.

  4. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

  5. Turn on the printer to complete the reset.

Now, try printing.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation