Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
1 0 0 0
Message 1 of 2
Flag Post

Close the right door to continue error

HP Recommended
Design Jet 1055cm plus

Printer is stuck on the startup routine with a "Close the right door to continue" error.  The door is closed. but cannot get through the error.

Level 5
268 257 17 59
Message 2 of 2
Flag Post
HP Recommended

More than likely, the door sensor is broken, out of position or stuck. Open the door and see if you can locate the slot where the sensor is and see if there's an obstruction, needs to be freed, or needs replaced.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation