-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- Designjet T520 Can not process print job

Create an account on the HP Community to personalize your profile and ask a question
11-14-2020 02:19 PM
Design jet T520, sent a plot job to the plotter the screen shows plot job name and a continues HP circled by the blue processing symbol and never pass this point during a plot, test plot and have tried different files same results.
All other functions seam to work, and No Errors.
Preformed a reset and hard reset same out come each time.
Can anyone pin this down for me?
Solved! Go to Solution.
Accepted Solutions
11-15-2020 12:22 PM
Resolved my own problem,
Turns out the T520 will not tell you if ink is low when using none HP cartridges, it will also not print and just site there with the HP insignia going in circles. i changed my ink cartridges and it now works.
If HP thinks wasting my time over 6hrs trying to resolve this is funny then my next plotter will be another brand.
11-15-2020 12:22 PM
Resolved my own problem,
Turns out the T520 will not tell you if ink is low when using none HP cartridges, it will also not print and just site there with the HP insignia going in circles. i changed my ink cartridges and it now works.
If HP thinks wasting my time over 6hrs trying to resolve this is funny then my next plotter will be another brand.