cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
serge_dugal
Level 4
103 70 2 3
Message 1 of 3
1,452
Flag Post

Error 39.12:01 or 39.11:01 (media unload)

HP Recommended
Designjet T2530
Microsoft Windows 10 (64-bit)

Hi.

I having problem troubleshouting this error 39.12:01. I have follow all the instructions from the service manual (hubs, hubs distances each sides, replace the #1 rewinder motor&  the 2 spindles, verify for no obstructions on the paper path sensor), still the user is still having the same issue. 

 

After replacing each part, the plotter work for  few weeks, then the message appear again. It's eather 39.12:01 or 39.11:01.

If someone can help, it will be greatly appreciated.

2 REPLIES 2
PaulElw
Level 1
11 11 0 1
Message 2 of 3
Flag Post
HP Recommended

Serge,

 

Hello. Does this occur with a specific type of media or media core size?

Can media slip when loaded onto any spindles?

Is length of media roll entered when media is being loaded? is the length amount correct?

I would personally check the media and try a variant to see if the error occurs with a different brand/type of media roll.

Paul Elwin
Was this reply helpful? Yes No
serge_dugal
Author
Level 4
103 70 2 3
Message 3 of 3
Flag Post
HP Recommended

Hi. Thanks for the reply.

They are using only one type of media: 36" plain paper. For the Media core, the hubs fit perfectly in the cores.

The media doesn't look like it's slipping.

When the error occur, when we reload the media, we select unknown length, otherwise, with a new roll they select the right lenght.

I will ask them to buy a different kind of media and test it.

 

Thanks.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation