cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Techsuport
New member
1 0 0 0
Message 1 of 2
4,804
Flag Post

Error Code 89:03 " Restart your printer . If problem persists , call HP support.

HP Recommended
T2500 -CR358A

Error Code 89:03 " Restart your printer . If problem persists , call HP support.

 

Dear Team,

 

Can you please help to solve this error code.Thanks

1 REPLY 1
davidzuts
Level 13
7,130 7,062 558 1,025
Message 2 of 2
Flag Post
HP Recommended

You may to have a service technician come in to look at the plotter.

 

 

89:03 Stacker ramps motor error
Call agent:
1. Use the power switch at the rear to turn off the printer, then disconnect the power cord.
Remove all paper from the stacker and basket.
Reconnect the power cord, then turn on the printer.
2. Perform the stacker ramps motor diagnostic test to troubleshoot the problem further.
Service engineer:
1. Check that the stacker ramps motor cable is undamaged and correctly connected to the engine PCA.
2. Replace the stacker ramps motor. 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation