cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
KaeDoe
New member
2 1 0 0
Message 1 of 8
2,009
Flag Post

Solved!

HP DESIGNJET 500

HP Recommended
hp DesignJet 500
Microsoft Windows XP (64-bit)

General question... I'm looking at purchasing a slightly used designjet 500 and can not see in the product features if it's both a printer and cutter.  Can anyone tell me if the designjet 500, 24 inch printer provides plotting features for making signs or conrour cuts?

 

Thanks in advance,

Ken

1 ACCEPTED SOLUTION

Accepted Solutions
Ask-Me
Level 7
839 819 66 105
Message 4 of 8
Flag Post
HP Recommended

Hello Ken,

 

Designjet 500 has the ability to cut paper/media in a straight line (at the end of print job, to cut/separate media from roll at the end of print job), but I do not think that this option is suitable for your requirement.

 

Regards,

 

Ask-Me

Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!

(Although I am an HP employee, I am speaking for myself and not for HP)

View solution in original post

Was this reply helpful? Yes No
7 REPLIES 7
D Hook
Level 7
873 820 36 100
Message 2 of 8
Flag Post
HP Recommended

I don't believe the 500 has any cutting capabilities.

 

Not sure if any Designjet models have that feature, AFAIK.  Might want to do a search on this site.

Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 3 of 8
Flag Post
HP Recommended

Hi,

 

Please noted the information. Each and every printer have treir own cutter unit with the printer and their options cutter on/off  mode. You may check the settings in the front panel and printer preference ettings.

 

 

Thanks,
Rashed


I am not an employee of HP but I am an engineer @ HP Partner and I am share my knowledge from my own time.

If your problem is solved please click the "Accept as Solution" button

If my answer was helpful please click the "Thumbs Up" to say "Thank You"

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
Ask-Me
Level 7
839 819 66 105
Message 4 of 8
Flag Post
HP Recommended

Hello Ken,

 

Designjet 500 has the ability to cut paper/media in a straight line (at the end of print job, to cut/separate media from roll at the end of print job), but I do not think that this option is suitable for your requirement.

 

Regards,

 

Ask-Me

Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!

(Although I am an HP employee, I am speaking for myself and not for HP)

View solution in original post

Was this reply helpful? Yes No
KaeDoe
Author
New member
2 1 0 0
Message 5 of 8
Flag Post
HP Recommended
Thank you
Was this reply helpful? Yes No
D Hook
Level 7
873 820 36 100
Message 6 of 8
Flag Post
HP Recommended

The question was whether or not the designjet 500 will make contour cuts, which it does not.  My answer applied to that part of the question, not whether or not it will cut the paper at the end of a printout, which it will.

 

Hope that clarifies.

Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 7 of 8
Flag Post
HP Recommended

Hi,

 

Yes, Printer will cut the paper at the end of a printout and if you want you manually cut the paper on command basis (Through control panel cutter unit button).

 

Total process will depends on your print command settings.

 

 

Thanks,
Rashed


I am not an employee of HP but I am an engineer @ HP Partner and I am share my knowledge from my own time.

If your problem is solved please click the "Accept as Solution" button

If my answer was helpful please click the "Thumbs Up" to say "Thank You"

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
DixonMarshall
Level 2
16 14 0 2
Message 8 of 8
Flag Post
HP Recommended

No contour cuts, it will only cut the paper to the specified length at the finish of the print job. The exception is canvas print material, which it cannot cut at all.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation