• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
Locked

‎10-26-2018 07:49 AM - edited ‎10-26-2018 07:57 AM

HP Recommended
Product: HP DesignJet T920
Operating System: Microsoft Windows 10 (64-bit)

Hello Everyone,

Could you please help me with any solution for a HP DesignJet T920 unable to load "little" like 610 or 420mm rolls?
When we tried to load this kind of rolls always get the message correcting skew but when it tries to correct it will be even worse and after unload it automatically. With large, like 841mm rolls there is no problem, it can be loaded after correcting the skew.
It has the latest firmware installed (MRY_06_00_06.1.fmw), cleaned the papr path, line sensor cheched and calibrated too.
Do you have any other idea to solve this issue? If we directy put the paper with a little skew sometimes it can be loaded.
Thank you for any suggestion.

Regards,
Elekresz

1 ACCEPTED SOLUTION

Accepted Solutions

‎10-29-2018 08:28 AM

HP Recommended

Hello Everyone,

We tried to clean the paper path again and the starwheel assemby is changed too. 
It's seems to be working now. 

Regards,
Elekresz

View solution in original post

Was this reply helpful? Yes No
1 REPLY 1

‎10-29-2018 08:28 AM

HP Recommended

Hello Everyone,

We tried to clean the paper path again and the starwheel assemby is changed too. 
It's seems to be working now. 

Regards,
Elekresz

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.