• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
HP Designjet 800

20200421_145657.jpg20200421_145653.jpg20200421_140028.jpg20200421_142213.jpg20200421_140018.jpg20200421_145704.jpg

I bought this printer from facebook market place and I replaced the heads with HP printheads and it prints better but still has the lines. We did multiple alignments and still the same. The printer shakes and it doesnt seem normal so we were thinking about maybe it needs a new belt? With this info can anyone help me out?

4 REPLIES 4
HP Recommended

To me you appear to have a banding issue. Typical causes are quality of paper and lack of paper advance calibration. These machines to move around a little, especially if there are any loose parts on the stand. If you look at the belt, it should have consistent color and no cracking. Also make sure that that the carriage rod is lubricated to ensure smooth movement.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.



HP Recommended
I'm gonna do all that you said and let you know what happens!
HP Recommended

It is a typical banding, because the image quality is no correct setting. Put the printer in hight quality. If not, used correct media.  

 

HP Recommended

Too. You should to do accuracy calibration for advance media because the plotter is in a new environment. With a correct media. And color calibration too. You have not replace any belt if not damage.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.