• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Do you need the WPS PIN to connect your printer? Click here for tips and tricks!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
HP officejet pro 6960

I am trying to print some documents, I bought new ink twice and the printer isn't using the ink, it just prints a blank page. Ive tried all printer maintenance options and nothing will work.

1 REPLY 1
HP Recommended

@Tajkhan

 

Welcome to the HP support community.

 

Make sure the ink cartridges are properly vented and seated correctly

  1. Turn on the printer, if it is not already turned on.

  2. Open the ink cartridge access door.

    The carriage moves to the center of the printer.

    Open the cartridge access door

  3. Wait until the carriage stops moving before you continue.

  4. Press the tab inward on the front of the old ink cartridge to release it, and then pull up on the ink cartridge to remove it from the slot.

    Pushing the ink cartridge inward and then pulling up to remove it

  5. Examine the vent area above the HP logo on the top of the ink cartridge.

    Image: Examine the vent area on the top of the cartridge

  6. If the ink cartridge still has the orange pull-tab attached, pull to remove it.

    Image: Remove the orange pull-tab

  7. If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.

    1.  

      Clogged vent
    2. With a straight pin, gently remove excess adhesive from the vent

    3. Unclogged vent

  8. Turn the ink cartridge so that the ink cartridge contacts face downward, and then match the label color with the color dot on the carriage.

  9. Slide the ink cartridge into its slot, and then gently press the ink cartridge down until it snaps into place.

    Reinserting the ink cartridge

  10. Repeat these steps to inspect the vents on each of the ink cartridges.

  11. Make sure each ink cartridge is firmly installed in its slot. Run your finger along the top of the ink cartridges to feel for any that are protruding, and if any are, press down firmly until each ink cartridge snaps into place.

  12. Close the ink cartridge access door.

    Closing the ink cartridge access door

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.