Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
1 0 0 0
Message 1 of 2
Flag Post

HP t7200 printhead error

HP Recommended

I have a HP t7200  had showed me that the yellow print head need replacement i purchased a new one and installed, but without result always as for inserting a new yellow  head in the socket  , i switched between the two yellow head to be sure maybe the new one have a problem but the same issue always with the first socket of yellow print head  always printhead replacement i can't  

Level 2
Level 2
12 11 0 3
Message 2 of 2
Flag Post
HP Recommended



The most frequent cause for print head rejection are ink stains on the print head connectors. You can clean them gently with a cotton ear bud lightly soaked with distilled water. You may clean either the printhead itself and also the connector on the printer side. If this does not solve the problem, then the printer may need a repair.


I hope this helps.



I am a HP Employee
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation