Create an account on the HP Community to personalize your profile and ask a question
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
06-27-2021 03:26 AM
Operating System: Microsoft Windows 7 (32-bit)
i installed the disc on my hp designjet 4500 and it worked. does not let me install the second roll.
seems to be hard for the hp 4000 and not for 4500.
attached photo says impossible to install accessory.
how to solve the problem?
3 REPLIES 3
06-27-2021 04:40 AM
Here's how the service manual describes that error code:
Media jam in between the printer and the accessory.
Try the following:
Remove any media jammed in the Printer or Stacker and restart the
Perform the Stacker Test ⇒ Page 4-65.
Perform the Media Drive Test ⇒ Page 4-12
You might have a paper jam between the roll 1 and roll 2. Or elsewhere in the paper path.
If not, you might have the wrong hard drive for that printer. Repairtrooper might have a part number for the correct hard drive. Only one I found in the service manual was Q1271-60751. You can google that part number and see what all comes up and the description for the hard drive. The part number is usually printed on the hard drive somewhere. Is this a PS model or non-PS?
Did the printer originally come with the Roll 2 already installed? Is the cable attached in the back of the printer for the roll 2 drive? Does the old hard drive work at all? Is it useable for trouble shooting?
I have three of these printers but haven't come across this error except when paper gets jammed somewhere. But I've never had to replace a hard drive either.
06-27-2021 06:07 PM
I'm happy to report that yes, I can read. I read the service manual and 38.01 is not listed in the error codes.
I guess you can't seem to read too well either since you didn't answer any of the questions that may shed more light on the problem.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community