I can't install the HP driver for the T520 under Windows 11. (installation fails).

[JohnDawson]

anyone else have this problem?  The HP installer simply says that the driver was not installed, it doesn't give a reason.  Any advice?

[BeemerBiker]

You may need to uninstall any previous drivers

Run the following app from the command line

printui /s

Remove all references to the HP printer.

Install the new driver and then search for the printer

---

The below is all know about your T520.  Hope I am not oversharing.

---

Watch the reset video or perform the steps. After resetting, you generally have 2 hours to complete the setup. Decide if you want to connect the printer to the router or to print directly to the printer and bypass the router.

Many HP and other OEM printers have problems with the router when the router has two bands and both bands have the same name (SSID). Log into the modem and rename one of the bands. Alternately, contact your ISP and have them rename a band.

Or simply use Wi-Fi direct (but read note below about Instant Ink).

If English is not your native language or if you wish to get additional information not covered below, then use the HP and Microsoft support assistants. The latest HPSA supports 36 languages and can be downloaded here. Microsoft's AI assistant is in the latest Windows 10 and 11 releases and there are instructions here on how to enable the AI. Microsoft's AI assistant (Copilot) has a microphone button and supports natural language processing.

Do not call any phone numbers shown in any of the videos or revealed by a Bing or Google search. You may need to reset your printer.

Disconnecting the USB cable may still leave the printer in the wired or Wi-Fi mode. Connecting an ethernet cable may still leave the printer in Wi-Fi mode. The Wi-Fi reset is used to put Wi-Fi printers into setup mode. Some resets are simple and others require a video to understand. Factory resets cannot be revealed in this forum. To do a factory reset of your printer, you must contact HP.

Click here for world-wide contact info

Wi-Fi reset instructions and videos (if any) are shown below. Generally you have 2 hours to connect your printer after performing the Wi-Fi reset. Note that a reset video may show a slightly different model than yours. Do not call any phone numbers revealed in any video or site.

The steps below are Wi-Fi only and do not perform a factory reset.
Microsoft's Copilot may provide alternate solutions.

T520

1. Hold down th3e4 power button for 15 seconds or
2. Read page 103 of the service manual

Wi-Fi connection

Ideally, your Wi-Fi printer should connect to the modem or router. If your network has multiple boosters / repeaters, it is possible the printer may connect randomly to any of the units. The router needs to provide the same IP address on every connection. This rarely happens with random connects. An alternate Wi-Fi connection is Wi-Fi direct. Your laptop or smartphone prints directly to the printer and does not go through the router. Note that if you signed up for instant ink or internet printing your printer must also be online through the router. Do not call any phone number revealed in any video or site.

This video shows how to connect to the router: T520

Software

HP updates software periodically. Downloads shown below may be old. You should always visit the Software and Download page to look for new releases. You may need to select an operating system (OS) first. If windows 11 is missing then use 10. You can go as far back as Windows 7, 64bit to get missing drivers. After selecting the OS click the blue Open all button to view all downloads.

You can find all of the software here. You should select the OS and then look for the phrase "Open All" and click that. T520

Documents

All documents are available at the below HP site. The user and reference manuals show how to get status reports and analyze error indicators on printer that have no control panel.

All HP manuals are here: T520

Support Videos - Parts - Disassembly

HP has a YouTube site and there are a number of video in English and other languages. Typically unboxing, clearing paper jams, and cartridge problems. You may also find instructional disassembly videos from other users.

Parts, if any available, can be found here T520. Use your serial number for more extensive information.
Disassembly is shown in this video: T520
Printer problems could be cleared by one or more of these HP YouTube videos T520

Printer Reference

One or more printer reference is listed below. Typically your printer may be part of a series and use the same software and manual. The exact spec may be different.

Specifications for your system: T520 T120

Contact form for problems click here

Ink Problems click here


Wireless troubleshooting 120 and 520

Let me know if a problem

[JohnDawson]

Beemerbiker, thanks for your detailed email, however I still can't install the driver.  I have attached a link to series of screenshots showing how the driver installation fails; any suggestions of what to do differently appreciated.  best, John

https://drive.google.com/file/d/1weTKmq7zeh2FLZ2jnRnCvQNFUSvttrGn/view?usp=sharing 

[Reprotech]

I think your error file shows that you are loading the Designjet and Pagewide XL printer driver installer 15.3Mb.    From HP's download page go to the IT advanced installation package flyout and download "HP Designjet and Pagewide XL PC3 driver for windows" 8.8mb.   Unzip it .    manually do an "add printer" and browse to the unzipped file when when selecting your model.  You will need to change port to TCPIP and have you IP address or host name to enter.   I never use the .exe loader.    If you get it loaded make sure to default the rotation setting to Zero from autorotate.

If  it still fails or after loading or it looks like an old version of the driver then go to "print server properties" near the bottom of the printers & scanners window.   Drivers tab.     Remove any old HP driver packages (reboot may be needed).   Dont worry about the text and it saying something could not be uninstalled (does not seem to be an issue).  Getting  rid of everything HP might be needed but might effect other printers if you have them.   Easy to readd the others with newer drivers clearing out the old ones.