cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
shiflerg
Level 2
22 11 1 0
Message 1 of 6
580
Flag Post

Solved!

Output tray for 7740

HP Recommended
Hp OfficeJet Pro 7740
Microsoft Windows 10 (64-bit)

Is there an output tray for printing materials. Right now my printer just throws them on the floor. 

1 ACCEPTED SOLUTION

Accepted Solutions
shiflerg
Author
Level 2
22 11 1 0
Message 5 of 6
Flag Post
HP Recommended

Actually I found the output tray. I just didn't recognize it as such. thanks for all your help.

View solution in original post

Was this reply helpful? Yes No
5 REPLIES 5
Jeet_singh
Retired
Retired
21,068 21,004 1,399 2,375
Message 2 of 6
Flag Post
HP Recommended

Hi @shiflerg,

 

Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! I came across your post and wanted to assist you. I see that you are having issues with the Output tray on your HP OfficeJet printer. Don't worry as I have a few suggestions which should help you resolve this issue.

 

Let's start off by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

 

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

 

If your printer connected wirelessly, make sure to temporary connect the device with USB and then follow the link to install the latest firmware update for your printer, using this link: http://ftp.hp.com/pub/softlib/software13/printers/oj7740/OJ7740_R1706A.exe

 

For more assistance, please follow the User Guide of this printer, click here

 

Here's a related HP Forum post which seems to have helped others: Click here

 

Let me know if those steps worked for you.

If they did, that’s awesome!

Give us some reinforcement by clicking the solution and kudos buttons,

That’ll help us and others see that we’ve got the answers!

Good Luck.

Jeet_Singh
I am an HP Employee

Was this reply helpful? Yes No
ADAMSTRECK
New member
3 2 0 0
Message 3 of 6
Flag Post
HP Recommended

Thats is the incorrect printer.  Mine is the DesignJet t520

Was this reply helpful? Yes No
ADAMSTRECK
New member
3 2 0 0
Message 4 of 6
Flag Post
HP Recommended

Sorry guys, wrong thread

Was this reply helpful? Yes No
shiflerg
Author
Level 2
22 11 1 0
Message 5 of 6
Flag Post
HP Recommended

Actually I found the output tray. I just didn't recognize it as such. thanks for all your help.

View solution in original post

Was this reply helpful? Yes No
schaum
New member
1 1 0 0
Message 6 of 6
Flag Post
HP Recommended

Bro how are you ? sorry for this but do you have OJ7740_R1706A.exe , because i cant download in this link 

http://ftp.hp.com/pub/softlib/software13/printers/oj7740/OJ7740_R1706A.exe

i appreciate your help thanks so much.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation