• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
Guidelines
Is your printer showing an error message? Click here for tips and tricks!
Get help with Large Format Printers, with direct access to all Large Format Knowledge Center· Ask anything · Find anything · Share anything at HP LKC
HP Recommended
Designjet T520
Microsoft Windows 10 (32-bit)

Hi,

 

I am trying to print on both the multi sheet tray and via the roll but no matter what size I attempt to print at I keep getting a paper size is incorrect error message and when I press print anyway it just spits the paper out with nothing on it and cancels the print job as if this had been printed. I have tried a factory reset, uninstalling the printer and then reinstalling again and I've also installed the latest firmware but still cannot get the error to clear. Any help would be appreciated.

 

ThanksThis is an example of the errors I'm gettingThis is an example of the errors I'm getting

1 REPLY 1
HP Recommended

Hello @pivotal 

 

Using the driver version 4 you need to apply some adjustments, please check the following table:

 

HarryCR_0-1613047914973.png

 

This is been the solution for many of these issues, I hope this works in your case.

 

Regards.

I am an HP employee
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.