cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
GregBowden
New member
2 1 0 0
Message 1 of 7
8,542
Flag Post

T120 Only prints half a page

HP Recommended
Designjet T120
Microsoft Windows 10 (64-bit)

I have recently bought a Designjet T120 and I am using it with an ArchD (24" wide) paper roll. It is connected to my Windows 10 64-bit PC by USB. When I print from AutoCad the print preview shows the whole image but when it is printed the top 40% is missing (by top I mean the 40% on the left of the paper looking at the printer, i.e. nearest the LCD screen). I have tried exporting the image to PDF but the same thing happens.

 

I have the Designjet utility installed and updated the printer to the latest firmware. The properties say I am using the HP Designjet T120 Class Driver. I would really appreciate any help or suggests as it is driving me mad. Thanks very much.

6 REPLIES 6
rasheddul
Level 7
634 609 35 85
Message 2 of 7
Flag Post
HP Recommended

Hi,

 

I hope you enjoy your visit to the HP Support Forums.

 

Please follow the below link instruction. If problem persist, please let me know, I will try to my best.

 

HP Designjet T790 and T1300 ePrinter Series - Advanced print settings

 

HP Designjet T120 and T520 ePrinter Series - Advanced print settings

 

 

 

Thanks,
Rashed


I am not an employee of HP but I am an engineer @ HP Partner and I am share my knowledge from my own time.

If your problem is solved please click the "Accept as Solution" button

If my answer was helpful please click the "Thumbs Up" to say "Thank You"

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 3 of 7
Flag Post
HP Recommended

Hi,

 

If as my earlier post not working, please check the link for exact print size: Paper Size

 

 

Thanks,
Rashed

 

I am not an employee of HP but I am an engineer @ HP Partner and I am share my knowledge from my own time.
If your problem is solved please click the "Accept as Solution" button
If my answer was helpful please click the "Thumbs Up" to say "Thank You"

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
GregBowden
Author
New member
2 1 0 0
Message 4 of 7
Flag Post
HP Recommended

Hi Rashed,

 

Many thanks for replying but unfortunately nothing you linked to works for me. I may not have explained properly that the problem is not that my prints are too small - like an A4 image in one corner of an A3 page but rather that the image is the correct size but missing the top half. 

 

Have a look at the attached image - the bottom half of the image has been printed but the top half is missing.

 

IMG_20160822_110123.gif

Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 5 of 7
Flag Post
HP Recommended

Hi Greg,

 

Thanks for your reply. Unfortunately I haven't any image in the attach here.

 

Could you please send a picture in private message.

 

I will try solve this case.

 

 

Thanks,
Rashed

 

I am not an employee of HP but I am an engineer @ HP Partner and I am share my knowledge from my own time.
If your problem is solved please click the "Accept as Solution" button
If my answer was helpful please click the "Thumbs Up" to say "Thank You"

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
rasheddul
Level 7
634 609 35 85
Message 6 of 7
Flag Post
HP Recommended

Hi Greg,

 

Sorroy for my late response. Please try to follow the below instruction, if you are print through PDF. If not, please share the application name and version, original document image size, Operating Platform (PC/Laptop):

 

1. Go to print command

1.jpg

 

2. Advance

 

3. Select Postscript and Print as bitmap

 

2.jpg

 

 

N.B: Please try to print through other's application, what happend please share. Or you can try to clean the printer and then successfully complete the printhead alignment.

 

 

Thanks,
Rashed

 

I am not an employee of HP but I am an engineer @ HP Partner and I am share my knowledge from my own time.
If your problem is solved please click the "Accept as Solution" button
If my answer was helpful please click the "Thumbs Up" to say "Thank You"

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
starsstella
New member
1 1 0 0
Message 7 of 7
Flag Post
HP Recommended

Did you ever get this resolved or figured out? I am having the exact same problem and its making me go crazy!!

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation