cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Boydburl
Level 1
9 8 0 0
Message 1 of 14
653
Flag Post

T2300 will not boot up

HP Recommended
HP T2300 postscript MPF
Microsoft Windows 10 (64-bit)

 I have had 2 support chat sessions with HP to get my T2300 Postscript printer working. I have changed the Formatter/HDD (and installed the latest update for it), the touch screen panel and the interconnect PCA  . I am still getting the same 2 error codes and still get the light sequence on the formatter of 1. blinking, 2. on, 3.on and get error codes either 08:11 or 59.3:00.

  I have read some of the post on here with similar issues but never really read where there was an end to the issue. HP support was no help. This machine cost to much money to have it just sitting here. There is no one in my area that work on printers any more. Any insight/help would be appreciated

13 REPLIES 13
D Hook
Level 7
871 818 36 100
Message 2 of 14
Flag Post
HP Recommended

Do you have a service manual for the printer?

 

You might want to very carefully inspect the cable leading to the display panel for knicks or kinks.

 

What general area of the country are you located?

Was this reply helpful? Yes No
Boydburl
Author
Level 1
9 8 0 0
Message 3 of 14
Flag Post
HP Recommended

Central West Texas

 

Was this reply helpful? Yes No
Boydburl
Author
Level 1
9 8 0 0
Message 4 of 14
Flag Post
HP Recommended

Yes I have a manual. The lights on the Formatter sequence and the codes numbers all say to replace the items I replaced but none of them still helped

 

Was this reply helpful? Yes No
D Hook
Level 7
871 818 36 100
Message 5 of 14
Flag Post
HP Recommended

Looking in the service manual I can't find anything that aligns with you description of the lights that are flashing and the others that are on solid.

 

Here's a copy of the service manual you can download.  Check out pages 73-76.

 

https://www.laserexpressinc.com/manuals/HP/hp-dsj-t790-t1300-z5400-t2300-service-manual.pdf

 

The only place it shows LED i flashing is if the display is blank.  Unless I'm missing it.

 

Let us know what you find.

 

Also, read up on changing the formatter and hard drive together.  There are some conditions if you have a revision B model.

Was this reply helpful? Yes No
D Hook
Level 7
871 818 36 100
Message 6 of 14
Flag Post
HP Recommended

I've found these guys to be very helpful in trouble shooting also.  Good info on their website.

 

https://www.lpscomputer.com/collections/designjet-t1300-t2300-parts-page

Was this reply helpful? Yes No
LUCJANJONAK
Level 2
20 19 1 5
Message 7 of 14
Flag Post
HP Recommended

 

 

Hello 

I think You just need to replace HDD 

 

Look at this listing 

 

https://www.ebay.com/itm/283883873176?

Was this reply helpful? Yes No
Boydburl
Author
Level 1
9 8 0 0
Message 8 of 14
Flag Post
HP Recommended

Thanks D Hook, I will check their site

Was this reply helpful? Yes No
Boydburl
Author
Level 1
9 8 0 0
Message 9 of 14
Flag Post
HP Recommended

LucJ, I did replace HDD and formatter and touch screen and the inerconnect PCA

Was this reply helpful? Yes No
Boydburl
Author
Level 1
9 8 0 0
Message 10 of 14
Flag Post
HP Recommended

D Hook, LPS is the one I bought Formatter and HDD from but I questioned them again and see what happens

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation