cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
aparsons_hp
Level 1
7 4 0 0
Message 1 of 2
414
Flag Post

Z3200 fsck on bootup

HP Recommended
DesignJet Z3200

My Z3200 performs an extensive and time-consuming fsck on boot up.  While a previous thread talked in length about the hdd on the formatter board failing (*gulp*) I found a post elsewhere that pointed the finger at the little CR2032 battery on the formatter board.  I pulled the board popped out the battery and put a voltmeter on it - 0v.  Replaced the battery - massively cheaper and more direct than replacing the formatter  and all is well as far as the boot up is concerned.

 

First thing to check with fsck on boot up is the battery!!

1 REPLY 1
Repairatrooper
Level 13
Level 13
8,608 8,506 891 2,602
Message 2 of 2
Flag Post
HP Recommended

Thanks for sharing that tip. 

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation