designjet 450c driver with all colors needed

[mx96]

aclarke69 wrote:

Thanks Bob.  I followed the instructions to the T on my Vista machine.  When I got to step 7 and clicked "Okay", the following message appeared:  The folder you specified doesn't contain a compatible software driver for your device.  If the folder contains a driver, make sure it is designed to work with Windows for x64-based systems.

The only thing I can think of is the driver is not made for an x-64 based system. 

---

Oops - it was a critical piece of information missing there, that you are using an x64 system.  You will need the x64 version of the driver, which I have never found.

Edit - I do not know how I missed this one, it shoud install on your x64 system.  Download the driver here. The drivers installed fine on my Windows 7 x64 system.

Message Edited by Bob_Headrick on 12-02-2009 06:33 PM

Hello Bob and all others,

I have been also looking for driver to my designjet 450c . I use win7  x64 .

It looks that driver (  hpdj430x64glen )  prints only grayscale pictures.

How could I change it to support all colors. It doesnt give option at anywhere on settings.

Many thanks,

[RouterServ]

I had a big problem with Win7 64 bit and finding a driver for my HP-450C - looked and looked finally stumbled on winline.com and ordered the driver package - expensive, but it works.  Check it out.

[jdm13 · Accepted solution]

download and install it its for windows 7 64 and vista 64

http://www.mediafire.com/?r3mogwejgvo

Oooo and its free 🙂

[mx96]

Hi,

Thank you very very much. That seems to work fine.

Sorry this took so long to try. After a long hospital period I was not able to test it earlier.

anyway Thanks a lot. This really helps me out a lot.

Best regards

[jhframe]

I installed that driver and found that I can't print in color, only greyscale.

[mx96]

There is 2 drivers possible to load from this pages links. They are using same name so it is easy to mix them. Use the second driver , loaded from mediafire page. It should work fine.

[jhframe]

I only see 1 link on the mediafire site.  If there's another one, can someone please provide the direct link?

Thanks.

P.S.  The Winline driver seems to work, but they want $200 for it.  If there's a no-cost solution to getting my colors back, I'd like to find it.  It doesn't seem reasonable that switching from one Microsoft OS to another should break my printer.

[RPC_Docucentro]

Gracias, hasta ahora esta funcionando bien, observaré como se comporta y luego les dejo saber.

Tengo la impresora HP Designjet 450C E/A0 conectada en Red a través de un Print Server DLink DP-301P+ y el sistema operativo que estoy usando es Windows 7 32bit para las sobremesa y 64 bit para la Notebook; para la Notebook utilicé los controladores de 64bits para wins 7; y para la sobremesa en la cual tengo Wins 7 32bit; utilicé   los controladores para windows XP, me pregiuntaran como hicé esto y a la verdad no lo sé, lo que sé es que la impresora me está funcionando perfectamente. Les digo, estaré en observación del funiconamiento y luego les dejo saber.

Gracias de nuevo  por los controladores,

RPC. 

[Desingner632]

 If no drivers available hook the printer up to your network. You can purchas a network server pretty cheap..

[Desingner632]

I use a network server plugs in the back of your printer,, use your printer full functions..