cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
FLPGA
New member
1 0 0 0
Message 1 of 2
235
Flag Post

error message

HP Recommended
hp designjet 500 ps

What is an "Severe error: 0x3010002 - Task: tMach - File: sequence.c - Line: 758" and how do you clear it.

thank you

 

1 REPLY 1
Repairatrooper
Level 13
Level 13
8,804 8,668 915 2,646
Message 2 of 2
Flag Post
HP Recommended

This error is the same as a 21:10 error. This indicates a problem with the service station. It can be caused by a bad aerosol fan or blockage preventing the service station from moving properly. Service station is on the right side of the printer, you can open the window and look in to see if there is something in there like a piece of paper. Common on units this old is that there is just too much old waste ink that has dried out and is now blocking the station from moving properly.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation