cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
geisha25
New member
1 0 0 0
Message 1 of 4
5,065
Flag Post

problem printing with our HP Deskjet F4280 All-in One

HP Recommended
Deskjet F4280 All-in One

we've got a problem with printing with your HP deskjet F4280.

A few days ago we've print a lot of papers.

Then...

Suddenly, the printer did not want to print anymore and indicated that the ink was on. So new ink is done (right kind) and still indicates that the ink is on. The ink cartridges are good, so we do not get it.
Is the printer defective and should we buy a new one or can this problem be resolved?
The printer sometimes does not do it and does it again when we remove the cables from the printer.

Who can help us and has also experienced this problemIMG-20171019-WA0001.jpg

3 REPLIES 3
MKazi
Retired
Retired
12,746 12,697 830 1,560
Message 2 of 4
Flag Post
HP Recommended

@geisha25

 

Welcome to HP Support Forums. 🙂

 

Thanks for reaching out to us on HP Support Forums.

 

I understand that you have an HP Deskjet F4280 All-in-One Printer and it displays an 'E" error code. I read that you have installed original new HP ink cartridges and the printer still does not print. I'll be glad to assist you with this case. 

 

I recommend you to perform the following steps to isolate the issue and arrive at a fix: 

  • Disconnect the power cable from the printer while the printer is still ON.
  • Disconnect any other cables if connected the printer.
  • Press and hold the printer’s power button for 15 seconds.
  • The printer should be directly connected to the wall outlet and not to a surge protector.
  • Reconnect the power cable to print and the printer should power ON by itself. If the printer doesn’t power ON then please manually power it ON.

If the issue persists then please perform the steps based on the light blinking pattern from this HP document

 

Finally, if the issue persists then you may reset the printer. I have sent you a private message with the reset steps. 

Was this reply helpful? Yes No
Ronnieroo
New member
1 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Please pm me on how to reset

Was this reply helpful? Yes No
Kovacmil
New member
2 1 0 0
Message 4 of 4
Flag Post
HP Recommended

Thanks. I simply replaced the catrige and the printer started working again. Great advise.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation