-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- DesignJet, Large Format Printers and Digital Press
- t2300 printer power supply fan
![Sign in](/html/assets/sign-in-banner.png)
Create an account on the HP Community to personalize your profile and ask a question
12-04-2017 09:47 AM
So, I bought the power supply for the T2300 mfc printer, and it's just a board. What is the fan part number?
Solved! Go to Solution.
Accepted Solutions
12-04-2017 05:40 PM
I do not think you ordered the correct part. The power supply can be found at the link below:
http://www.partshere.com/online/detail.asp?partno=CR647-67010
The link below is for the power supply and main pca:
http://www.partshere.com/online/detail.asp?partno=CN727-67018
All that said from what I remember the fan is the same used in standard computer ATX power supplies. If you have an old supply just remove the fan and open up the old power supply to remove and replace the fan.
Attached are pages form the service manual which show you how to separate the ps from the main board assembly. After you separate you need to dig into the ps to remove and replace the fan. I have done it and it is not that hard.
12-04-2017 11:13 AM
If you bought the PSU from HP or a partner it would come with the fan and housing (not just a board)
There is no part number for the fan that I am aware of.
You can source the fan or similar from a local electronics supplier or end user store. (check the specs from the old one)
Good Luck,
Roy K
12-04-2017 11:28 AM
OK, no, I bought the power supply unit as listed in the HP web page and it was a board, wires, switch, plug with fuse. NO fan. And cute, yes I can find the voltage and size of the fan. If I can get to it an not have the printer down for a week, while I order from Newark, Digikey, etc.
So, thanks. No help.
12-04-2017 05:40 PM
I do not think you ordered the correct part. The power supply can be found at the link below:
http://www.partshere.com/online/detail.asp?partno=CR647-67010
The link below is for the power supply and main pca:
http://www.partshere.com/online/detail.asp?partno=CN727-67018
All that said from what I remember the fan is the same used in standard computer ATX power supplies. If you have an old supply just remove the fan and open up the old power supply to remove and replace the fan.
Attached are pages form the service manual which show you how to separate the ps from the main board assembly. After you separate you need to dig into the ps to remove and replace the fan. I have done it and it is not that hard.
12-05-2017 05:00 AM
Now, see, that makes sense. I originally went with what was listed on the HP repair parts website. What they call the power supply, is not the power supply. I spent $218.00 + sh +handling, upwards of $243.00, for nothing I needed. All I really needed to know, is what size and voltage of fan, so I could buy it elsewhere.
Thank you for actually reading and understanding my dillema. I guess parts are parts to most people. Found it for $15.00 elswhere. Again, thank you.
Didn't find what you were looking for? Ask the community