-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Poly Phones
- Desk and IP Conference Phones
- Poly Trio 8800 Self View

Create an account on the HP Community to personalize your profile and ask a question

02-25-2020 12:03 PM
We utilize Poly Trio 8800s paired with VisPro (Eagle Eye Producer and Eagle Eye camera) in our environment (full details below). I'm looking for a way to add configuration to the Trio that will allow the self-view to be disabled when not in a call, but then the self-view automatically enabled when in an active call. I've attempted to use the following parameters:
video.localCameraView.callState = 1
video.localCameraView.idelstate = 0
While the self view is disabled when not in a call, the self view doesn't automatically enabled when joining a call.
Trio 8800 Software Version: 5.9.2.7727
Phone Model: Trio 8800
Call Platform: Hybrid (Line 1 registered to Skype, Line 2 registered to CUCM; Skype conferencing only on line 1, audio only PSTN on Line 2)
MAC: 64:16:7F:4F:02:F4
Solved! Go to Solution.
Accepted Solutions
02-26-2020 01:20 AM
Hello @schmitj ,
Welcome to the Poly Community.
I checked in our Admin Guide and these parameters seem to be missing. I tested this myself and based on internal findings it may require the combination with another parameter.
I suggest you try:
<camera video.localCameraView.idleState="0"
video.localCameraView.userControl="PerSession"/>
If this fails please work with SCANSOURCE INC who sold this unit back in 04/09/2018
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
02-26-2020 01:20 AM
Hello @schmitj ,
Welcome to the Poly Community.
I checked in our Admin Guide and these parameters seem to be missing. I tested this myself and based on internal findings it may require the combination with another parameter.
I suggest you try:
<camera video.localCameraView.idleState="0"
video.localCameraView.userControl="PerSession"/>
If this fails please work with SCANSOURCE INC who sold this unit back in 04/09/2018
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN

02-26-2020 08:58 AM
The parameter of video.localCameraView.userControl="PerSession" makes the system revert back to default. This would still require the user to turn self-view on when joining the call.
I was looking to the community to see if other admins have encountered this request and found an implementation. Support doesn't typically assist with the configuration of the devices and usually require testing on their end as well. I have a unit to test with, however, the parameters I am finding do not seem to be functioning as the description shows.
02-26-2020 09:20 AM
Hello @schmitj ,
In my testing using 5.9.2.7727 in combination with 6.2.1.2-590033 in idle state, the self-view was off and in a call, it was on.
ScanSource can open a support ticket with Poly support for you.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
