-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Boot and Lockup
- Re: Boot Error

Create an account on the HP Community to personalize your profile and ask a question
07-31-2018 10:06 AM
As i switch on my computer I receive only the first boot screen with these information on bottom left
Hp Compaq dc7900 small form factor
<F9 Boot Menu><F10 Setup><F12 Network>
Then it stops there. I've tried to change keyboards USB and PS2, removing Cmos Battery, Disconecting everything but nothing new.
07-31-2018 07:51 PM
> HP Compaq dc7900 small form factor
> <F9 Boot Menu><F10 Setup><F12 Network>
With the computer powered-off, put one finger very lightly on the F10 key.
Power-on the computer, and immediately start tapping that F10 key -- do not wait for the "prompt" message.
Result?
-----------
Welcome to this forum.
Please click the purple/white "Thumbs Up" icon for every response that is helpful.
Also, please click "Accept As Solution" for the best response.
08-06-2018 08:59 PM
With only a PS/2 keyboard attached:
With the computer powered-off, put one finger very lightly on the F10 key.
Power-on the computer, and immediately start tapping that F10 key -- do not wait for the "prompt" message.
With only a USB keyboard attached:
With the computer powered-off, put one finger very lightly on the F10 key.
Power-on the computer, and immediately start tapping that F10 key -- do not wait for the "prompt" message.
Results?
08-10-2018 02:04 AM
Thanks, I tried with a PS2 keybord and instantly pressing F10 after power on. Am getting this message as shown in the picture that "Keyboard Error"
With F10 pressedThis also happen even if you've used a USB keyboard.
I tried to put a jumper as below but still nothing happened