cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
172
Flag Post

Charging Light blinks 8 times After charging port replacement in 13-4003dx (spectre)

HP Recommended
Spectre 13-4003dx
Microsoft Windows 10 (64-bit)

I have seen this issue brought up in several other threads . Unfortunately none of these solutions seem to be helping me out. I have 2 of Laptops That I have been using for approximately 5 years. Both of them are having issues with charging. I changed the charging port Following the procedure that was outlined in the Manual. Initially the laptop powered on but It almost immediately Flash off . Now there is no Charging light when plugged in however when I hit the power button, It flashes 8 times Briefly and then turns off . I have tried to Disconnect the battery, utilized different charge port commector, charged the battery all night. All to no avail. I even Attempted to maneuver where You hold down the power button for 30 to 40 seconds And connect the charger with no battery power. I saw that some people were able to Improve the situation with alternate adapter however I Connect to the known functional charger With no Improvement.

 

 

At this point it would not be cost-effective To replace the mother board. I am also terrified to attempt to fix The other charge port. 

 

Any help would be very greatly appreciated. 

1 REPLY 1
HP Support Agent
HP Support Agent
6,458 6,460 255 399
Message 2 of 2
Flag Post
HP Recommended

@AsperknollsWelcome to HP Community!

 

I understand that the Spectre 13-4003dx laptop charging light blinks, after changing the charging port.

 

AS you have stated that you have already replaced the charging port and performed the hard reset.

 

The issue seems to be the hardware part. I would suggest you contact our phone support. They will help you.

 

Here is how you can get in touch with phone support.

 

1)Click on this link - www.hp.com/contacthp/

2)Select the product type.

3)Enter the serial number of your device or select let HP detect your product option.

4)Select the country from the drop-down.

5)You should see the HP phone support number or Chat option listed.

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!
 

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation