Corrupted BIOS, seeking a solution.

[M4Rv]

A faulty display port cable interrupted a BIOs update, now I am left with a beep signal verifying a corrupted BIOS.

No signal is being pushed through any of my HDMI/DISPLAY ports, no boot, nothing. I am here seeking a solution to my problem, here are my options currently, any new suggestions is appreciated. 

Motherboard:

Thimphu-K IMP17-TP

#799926 - 002 no DPK

#799926 - 602 WIN

- Start from scratch, build a new PC.

- Replace the Motherboard with a new one & seek additional new parts. [??]

- Find the exact Motherboard & swap them. [Is it that easy?]

- Find the exact BIOs chip & swap them. [Is it that easy?]

Mostly I'm just looking for an opinion on which route to take, any & all advice would be appreciated, I'll be checking this forum often. Many thanks HP community.

[Echo_Lake]

@M4Rv

Thank you for posting on the HP Support Community.

Don't worry as I'll be glad to help, I have a few troubleshooting steps we could try to fix the issue:  

Bios Recovery using a keypress combination:

1. Turn off the computer, and then connect the power cord.
2. Press and hold the Windows key and the B key at the same time, and then press and hold the Power button for 2 to 3 seconds.
3. Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps.

If this recovery method fails, use another working computer to create a BIOS recovery flash drive to install the latest BIOS file.
Click here: https://support.hp.com/in-en/document/c02693833 to know more about Recovering the BIOS (Basic Input Output System)

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.