-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Boot and Lockup
- Re: HDD disappearing after wake-up

Create an account on the HP Community to personalize your profile and ask a question
02-06-2022 06:57 AM
Hi, @hacketiwack
Other than updating the Intel chipset driver and Intel management engine interface drivers to their latest versions, I don't have any other ideas to offer.
This chipset driver is newer than the one on your PC's support page.
10.1.18243.8188
https://ftp.hp.com/pub/softpaq/sp101001-101500/sp101171.exe
Intel management engine interface:
2141.15.0.2511
02-06-2022 07:47 AM
Your might consider a two bay Synology system. Those drives are listed as compatible. There is also a discussion here
concerning the lack of firmware update to your torhiba drive and it seems disabling power management with hdparm is possible. There is a windows version of hdparm but I would go with Synology.
I have worked with several Synology systems both 2 and 4 bay and they are easy to use.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
02-06-2022 08:21 AM
Thanks BeemerBiker for the suggestion and the interesting information regarding these Toshiba HDDs.
These disks were working fine on Gnu/Linux and hdparm could stop them properly.
The options I see are:
- Selling these HDDs and buying newer and less "exotic" ones.
- Which brand would you recommend?
- Buying a SATA controller card.
- Which SATA card would you recommend?
- Buying a NAS: e.g. Synology
- Which model would you recommend?
Thanks
02-06-2022 09:16 AM - edited 02-06-2022 09:21 AM
The DS218+ is an excellent entry level NAS. I assume you want RAID 1 which the two bay will do.
This link shows your Toshiba drive as compatible with a (standard) warning about the firmware
You can check the firmware of your drive as below
I recently worked with one of my kids to upgrade the server where he worked. As the only lawyer there with any computer experience he was put in charge of the server: DS218+
Within a week of upgrading from 2-Tb to a pair of 10-Tb Seagate, one of them went bad. I have been using a 4 bay for three years and never had a problem with 8tb Seagate. On thing we discovered quickly was the files could be accessed from anywhere on the internet even if the NAS had a dynamic IP address. This works nicely when working from home due to COVID.
Synology had a community but just like here sometimes, there can be a lot of questions and few answers.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
02-06-2022 12:35 PM
Thanks for sharing your experience.
For the records, the firmware of the Toshiba HDDs is in version 103, which shouldn't be a problem.
In the meantime, I will order a good SATA controller card and let you know if this solve my immediate problem.
- « Previous
-
- 1
- 2
- Next »