cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
2 1 0 0
Message 1 of 5
529
Flag Post

Solved!

HP 27-a210 All-in-one Beep Code

HP Recommended
HP 27-a210 All-in-one Beep Code
Microsoft Windows 10 (64-bit)

I am having issues with this desktop booting. It is giving a beep code of two long beeps and two short beeps. I have researched this and everything says Bios corruption. I have tried rolling back and updating the Bios and this does not resolve the issue. When I try to update the Bios it recieve the message "The System Bios update failed. Bios image file specified is not intended for this system." no matter which version I try.

 

The machine also blue screens with the error "System_PTE_Misuse".

4 REPLIES 4
Highlighted
Level 12
7,692 7,654 328 687
Message 2 of 5
Flag Post
HP Recommended

Hi

Hope this helps.

You get a LONG (MAJOR) signal category, RED LED &

then a SHORT (MINOR) signal category, WHITE LED.

Major – the category of the error; Minor – specific error in that category

The AUDIBLE repeats 5 times, and the VISUAL until power is removed.

 

BIOS

2.2

The main area (DXE) of BIOS has become corrupted and there is no recovery binary image available.

Also happens when updating BIOS.

Typically no steps needed.

1. Allow the system to complete its updates and changes.

2. If updates are stalling, attempt Sure Start Recovery.

 

Therefore I suggest....

https://support.hp.com/us-en/document/bph07107

https://support.hp.com/us-en/document/c02693833

You may need to create a BIOS flash drive and replace/re-install the BIOS.

 

https://support.hp.com/us-en/product/hp-pavilion-27-a200-all-in-one-desktop-pc-series/13823538/model...

https://support.hp.com/us-en/drivers/selfservice/hp-pavilion-27-a200-all-in-one-desktop-pc-series/13...

 

There are FOUR different MAIN BOARD's BIOS files listed.  You need the EXACT one.

ESC  and then F1 get's you here.

Mine's 8130.  Your choices seem to be

SSID 81B7

SSID 81B8

SSID 81B9

SSID 82DC

Highlighted
Author
New member
2 1 0 0
Message 3 of 5
Flag Post
HP Recommended

Okay, I have done all of this and reinstalled the Bios after finding the correct board ID and matched it with the correct bios download. The install goes through but the machine still blue screens on boot and gives me the same beep code (2.2)

0 Kudos
Highlighted
Level 12
7,692 7,654 328 687
Message 4 of 5
Flag Post
HP Recommended

Hi

This suggests a Main Board problem.

Highlighted
Level 12
7,692 7,654 328 687
Message 5 of 5
Flag Post
HP Recommended

Prego.

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation