cancel
Showing results for 
Search instead for 
Did you mean: 
0_AMR_0
New member
1 0 0 0
Message 1 of 2
160
Flag Post

HP 6200 and Secure Boot ,

HP Recommended
HP 6200 Pro Microtower
Microsoft Windows 7 (64-bit)

how to assign password to HP6200 desktop PC setup to make UEFI options for secure boot visible ?
and  i  can`t boot new OS on any other devices because my computer booting  only on hard drive (no  DVD or USB flash ) ?

1 REPLY 1
Paul_Tikkanen
Level 21
Level 21
130,051 120,228 19,684 30,083
Message 2 of 2
Flag Post
HP Recommended

Hi:

 

The HP 6200 Pro business desktop PC series does not have the secure boot option.

 

Only PC's that came with W8 or newer from the factory would have secure boot, such as the later models of the HP 6300 Pro business desktop series.

 

To boot from another device (DVD/Flash drive), turn on the PC, tap the ESC key at the beginning of the HP welcome screen to get the menu of options.

 

Select the F9 boot options menu.

 

There should be a Legacy boot devices section.

 

Select the USB flash drive or DVD from that section.

 

Now this is important...when booting from a DVD you actually have to go to the line below where the DVD is listed (I think it will say SATA 2), select that, and press the Enter key.

 

The PC should then boot from the DVD.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation