cancel
Showing results for 
Search instead for 
Did you mean: 
IcedRegent_2080
New member
2 1 0 0
Message 1 of 4
1,218
Flag Post

Hardware Monitor is not there.

HP Recommended
Pavillion Slimline
Microsoft Windows 7 (64-bit)

I have a cpu fan error and I need to get to hardware monitor. So I open up bios go over to the power tab. And I look it up and down there is no hardware monitor. There is stuff like after ac power failure, XD (execute disable), Virtualization technology, S5 Maximum power savings, and WOLVin S5. That is all. Any help is appreciated.

3 REPLIES 3
asmita6658
HP Support Agent
HP Support Agent
14,452 14,454 1,432 1,715
Message 2 of 4
Flag Post
HP Recommended

Hi @IcedRegent_2080

 

Welcome to the HP Support Community. 

 

1) May I have the exact model name of the computer? Click here for steps on finding the information we need. Do not share any of your personal information such as serial, phone number, email ID, etc.
2) Is your computer booting up? 

 

While you respond to that, try these steps to perform the -

 

1) Hold the power button for at least five seconds to turn off the computer.
2) Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3) On the HP PC Hardware Diagnostics (UEFI) main menu, click System Tests.

 

You may also try the steps mentioned here


Let me know how that goes. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

 

Have a great day!

Asmita
I am an HP Employee

0 Kudos
IcedRegent_2080
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Yes the computer starts up and it is a 2009-2010 hp pavillion slimline.

0 Kudos
asmita6658
HP Support Agent
HP Support Agent
14,452 14,454 1,432 1,715
Message 4 of 4
Flag Post
HP Recommended

@IcedRegent_2080

 

Thanks for replying. Have you tried the steps mentioned in this document?  If the issue still persists, try these steps -

 

1) Shutdown the computer. 
2) Turn the computer back on again and repeatedly tap on the ESC until a Startup menu appears. 
3) Press F10 once for BIOS. 
4) Press F9 for BIOS defaults. 
5) Press F10 to save and exit. 

 

Also, try updating the BIOS. Refer to this document for steps - HP Desktop PCs - Updating the BIOS (Basic Input Output System)

 

Keep me posted. 

Asmita
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation