cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
New member
1 0 0 0
Message 1 of 3
196
Flag Post

Solved!

Hp split wont let Power on password be entered

HP Recommended
Hp Splitx2
Microsoft Windows 10 (64-bit)

When I boot my computer it just beeps and won’t let me enter administrator/ power on password. Is there something I am missing? It is the bios boot admin / power on prompt that doesn’t show anything in the box when I type the password even when I just hit enter it won’t do nothing. I just have to hold the power button down to shut it off or else the beeping drives me nuts

2 REPLIES 2
Highlighted
Retired
Retired
1,330 1,319 54 94
Message 2 of 3
Flag Post
HP Recommended

Thank you for visiting the HP Support Community.

 

According to the Community's Rules of Participation:

 

4d. No posts shall include instructions or directions intended to bypass or subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc., or to bypass any safety measures.

 

Therefore, this topic is being locked. If you would like help resetting the password on your product, please Contact HP support in your region. 

 

 

0 Kudos
Highlighted
HP Support Agent
HP Support Agent
15,792 15,752 671 739
Message 3 of 3
Flag Post
HP Recommended

@Herickson

Thank you for posting on the HP Support Community.

  • Did this happen after a recent window or software update?
  • Have you made any hardware/software changes?
  • Did you make any changes in the settings of your PC prior to the issue?

While you respond to that, let's try these steps: 

Firstly, run Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8  

Next step, BIOS default: 

  1. Turn off the computer and wait five seconds.
  2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
  3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
  4. Press F10 to Save and Exit.
  5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
  6. Follow the prompts to restart your computer.

Hope this helps! Keep me posted for further assistance.
Please click
Accept as Solution if you feel my post solved your issue, it will help others find the solution.

ECHO_LAKE
I am an HP Employee

Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation