cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
New member
1 0 0 0
Message 1 of 2
109
Flag Post

PC restarts after 5 seconds in an endless cycle

HP Recommended
HP Desktop 110-005ab

I have 2 PCs of identical model. One uses Windows 10 and the other uses Fedora Linux. They both have the same problem. The PCs switch on and after 5 seconds they restart. I would like to reload the BIOS. Any ideas?

 

Max21C

1 REPLY 1
Highlighted
Retired
Retired
17,747 17,730 1,296 2,021
Message 2 of 2
Flag Post
HP Recommended

Hi! @Max21C

 

Were there any recent windows update on the PC?

 

Do you hear any beep sounds on the PC?

 

Is the PC getting overheated?

 

Does the PC restart while you are at the BIOS page?

 

However, if you are able to boot into BIOS try the steps recommended below.

 

Try restoring the BIOS to default and check if it helps.

  1. Turn off the computer and wait five seconds.
  2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
  3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
  4. Press F10 to Save and Exit.
  5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
  6. Follow the prompts to restart your computer.

Try updating the BIOS and chipset drivers on the PC to the latest version and check if it helps.

 

You can update the drivers on the PC using HP support assistant. Click Here

 

Try the steps recommended below.

 

1. Use Windows shortcut keys Win + PauseBreak to open the System window.

2. Select Advanced system settings from the left column and the System Properties will pop up.

3. Choose Advanced tab and click on the button Settings in the Startup and Recovery section.

4. Disable Automatically restart under System Failure, and then click OK.

 

Also, try running a system diagnostics test on your PC and check if the hardware components on your PC are working fine.

 

Refer this article to know more information about running system diagnostics on your PC.

 

Lastly, if you are unable to perform any steps recommended it is a hardware issue with the PC.

 

Please contact HP support for service options. Click Here

 

 

Let me know if this works!

Have a great day ahead! 🙂

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

A4Apollo
I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation